Windows NT/ 2000/Xp Operation

The DVC-4 software will run under Windows NT or Windows 2000, except that the operating system security will not allow the dll to directly access the hardware; this places the software in the Demo Mode since the buss-check test fails.

For operation under Windows NT/2000/Xp the new 32 bit Version 2.0 or higher software is required, and the NT driver must be used. See the Software Downloads page for instructions.

If you get a printer error when running the software, it is because no printer is installed; install any one to eliminate the problem.

Revised 2/19/2002